If you’ve thought about having your Maryland inground pool removed, it’s a good idea to know what you’re getting into. When it comes to Maryland pool demolition, you have two options. You can either have you inground pool completely removed or partially removed. Appearance wise they both will give you the same result, but there are actually big differences in how you’ll be able to use the land after your pool removal. Understanding the difference between the different types of removal will allow you to make the best decision possible.
There are many benefits to having your inground swimming pool demolished. Some of which include: saving you money in the long term, increasing the value of your home, and reducing liability that is associated with being a pool owner. Pool’s can literally drain you of money because they require constant maintenance and upkeep. It can be exhausting taking the time every day to clean your leaves from your pool and make sure that the pH levels are exactly right. Getting your pool removed will solve all of these problems.
You also should consider the fact that your home is located in Maryland. Often times the extent of your pool season is only from about Memorial Day to Labor Day, and that’s not a super long time. You have to go through the hassle of winterizing your pool every year, only to have to reopen it a few months later. Pools just aren’t as valuable in Maryland as they are in warmer states like Florida or Southern California.
If you want to have your pool demolished, reach out to a Maryland pool demolition contractor for more information and to schedule your full or partial Maryland pool demolition.
Full Inground Pool Demolition
A full inground Maryland pool demolition is probably going to be your best option. It’s what is usually recommend by all Maryland pool demolition contractors. This is because a full removal will get rid of every part of your pool, which means that the land will be returned to its original state. You will be able to use the land for home expansion, a new patio, a swing set for your kids, or for whatever purpose you wish. The dirt they use to fill the hole where your pool used to be will be carefully compacted to ensure that your yard doesn’t experience any sinking or swelling. The dirt left behind will be sturdy and stable enough to support whatever additions to your yard are built on top of the old pool.
A full removal begins with draining the water and removing all of the pool equipment. Gas and electrical wiring must be removed before anything further can happen and often times you will have to hire a separate electrician to take care of this. Once this is successfully done, holes are punched in the wall to make it easier to break up the pool shell. Then, your Maryland pool demolition contractor will demolish your concrete lining in its entirety. If your pool has any steel that will have to be removed and taken away, as most cities don’t allow steel to be buried underground. Following this, Maryland dirt is used to fill the hole and it is expertly compacted to make the ground as stable as possible.
Partial Inground Pool Removal
When it comes to a partial removal, your Maryland contractor will leave most of the pool materials behind and will simply cover them with Maryland fill dirt. This means they will remove all of the pool equipment but leave behind the pool shell. They will then drill about 3 holes into the shell to ensure that water doesn’t collect there in the future. Next, they break away about a foot and a half of concrete from the top lining of the pool and simply throw it to the bottom of your pool. Then your pool is filled and compacted with Maryland fill dirt.
It’s important to realize that some pools cannot be partially removed; they have to be fully removed. This can be the case for some fiberglass pools, and for vinyl pools with steel supports. Talk to a Maryland pool demolition contractor about your specific pool so they can tell you whether a partial removal is possible or not.
A partial removal is the cheaper way to remove your pool, rather than having to have all of the materials demolished. It also takes less time for a partial pool removal to be completed. However, while many people jump at the cheaper costs, there are some serious drawbacks to getting a partial removal. Firstly, the land that is left behind is deemed “non-buildable”. Which means that you cannot build anything on top of it, and you will have to disclose your partially removed pool to any potential buyers as they need to be aware the land is not suitable for building. Secondly, if the process is not done correctly, there is the potential for sinkage and swelling to occur if the concrete is not layered properly and the dirt is not compacted in the right way.
Why You Should Have Your Pool Removed
Many people hesitate to have their pool removed because they fear the process. As previously explained, it’s actually not as bad as it seems. When the day for your pool removal finally rolls around, the whole process shouldn’t take more than a week. Cost is always a concern when it comes to pool demolition, but people fail to realize just how much money they are spending on their pool on a monthly basis. Usually, it’s hundreds of dollars. If you cut out these excess costs, you’re going to be saving lots of money in the long term.
Maryland weather just isn’t super great for a pool. It just isn’t worth the cost to have something you can only enjoy for a few months out of the year. Most Maryland homebuyers aren’t interested in buying a house with a pool as they see it as more of a liability than a luxury. So, having your pool removed will increase the value of your home and make it more marketable when the time eventually comes around to sell it. Call a Maryland pool demolition contractor to schedule your appointment.
